+420 553 764 091 avemar@avemar.cz
CZ SK EN
+420 553 764 091 avemar@avemar.cz
Druhý slider

BLR - Kontinuální snímač

Katalogové listy ke stažení

Parametre

Katalogové číslo BLR
Výrobce KSR KUEBLER Niveau-Messtechnik AG
Rozlišení: 5, 10, 18 mm
Teplota Max.: 350 °C
Výstup: 4..20 mA / 2 vodiče, HART®, PROFIBUS® PA, Fieldbus™, Exi, Display
Materiál: Hliník, Nerezová oceľ
Médium: abrazívne a agresívne látky, kvapaliny (agresívne), kvapaliny (neutrálny), kvapaliny pre solárne systémy

Popis

Description

The model BLR reed sensors are used for continuous monitoring and recording of the liquid level in connection with transmitters. They work on the float principle with magnetic transmission (permanent magnet, reed switch and resistance measuring chain) in a 3-wire potentiometer circuit.

A magnetic system built into the float actuates, through the walls of the bypass chamber and of the sensor tube, reed contacts at a resistance measuring chain (potentiometer). The measurement voltage generated by this is proportional to the fill level.

The resistance measuring chain is made up from reed contacts and resistors soldered onto a PCB. Depending on requirements and design several different contact separations from 5 to 18 mm are available.

For selecting the optimum sensor (sensor model, connection housing, electrical connection, sensor tube (material and total length), contact separation, head-mounted transmitter, measuring range, approval) we offer application-related technical advice.


Applications

  • Sensor for continuous level measurement of liquids in bypass level indicators
  • Chemical and petrochemical industries, oil and natural gas extraction (on- and offshore)
  • Shipbuilding, machine building
  • Power generating equipment, power plants
  • Pharmaceutical, food, water treatment, environmental engineering industries

Special features

  • Installation of head-mounted transmitters in the connection housing possible
  • Various contact separations selectable
  • Programmable and configurable head-mounted transmitters for field signal 4 ... 20 mA, HART®, PROFIBUS® PA or FOUNDATION™ Fieldbus
  • Explosion-protected versions
  • Temperature ranges from -100 … +350 °C

Technický dotaz

Ondřej Rozsíval, DiS.obchod a marketing

ondrej.rozsival@avemar.cz Skype: ondrej.rozsival
Tel.: +420 553 764 022 Mobil: +420 602 712 877

Kontaktní formulář

E-mail
Předmět*
Jméno a Příjmení*
E-mail*
Telefón
Dotaz*
Odoslaním formulára súhlasíte so zpracováním zásad osobních údajů.

Související kategorie

Kontinuálne snímače pre magnetické stavoznaky
© ARSYLINE 2016
Upozornenie
Zavrieť